How to Set Up a VPN on Your Router

How to Set Up a VPN on Your Router

In this modern world, everyone is known to the internet world. Internet platforms have become one of the most popular places, where everything is possible. But all these platforms are not secured. So in order to be secured browsing features on internet VPNs are used. This will provide the user with an encrypted form of browsing.

 

So let’s see How to Set Up a VPN on Your Router. Follow the below steps in order to successfully set up a VPN to your router.

 

➽ You need to download the router firmware

 

Firstly you need to decide whether you want to use DD-WRT or Tomato. Based on this condition you have to download the firmware. Downloading part is done in the beginning if not your router doesn’t work once it has been flashed.

 

➽ Connecting of Your Router

Here assembling your router is an important task. Setting up your router will vary based upon your router model number. To avoid all these issues mainly two routers with an internet connection are mostly recommended.

 

Now in order to set up both the routers, you need to configure the primary router so that VPN can be passthrough. This is done so any device can be a connection to your primary router to run the VPN client software. One has it has been activated you can connect the second router also.

 


Also, Read:- What is Windows 10X and How to Install Windows 10X


 

 

Follow this basic setting guidance:

  • Simply plug the ethernet cable into the LAN PORT of your primary router and connect to the WAN port of your second VPN
  • Now you have to connect the first router to your computer through one more ethernet cable and LAN PORT to your computer’s LAN port.

 

Else if you are using a wireless connection, make sure that your primary router is connected perfectly to your internet connection. The configuration of both the VPN router so it can piggyback on your first router internet connection.

 

➽ Flashing of your Router

Once you have successfully followed the above instructions your router is connected with newly installed firmware. Every router functions differently and steps of flashing are also vary every time based upon the model. Follow these steps to do it correctly or else you can check the user manual also

 

➽ How to connect and use your VPN Router

 

  • Once your router has started working based on DD-WRT or Tomato simply open the selected VPN, and connect it.

 

Based upon the kind of router and VPN you are using, the setting may vary for each device. Now in order to use, open the flash router and login to it.

 

  • Select the server
  • Select the country name
  • Click on the connect now option

 

You can buy the best VPN Router at a very exclusive price. Check here-

 

By using this step your VPN can be connected to the device and ready to use. All through the setup of a VPN to the router is somewhat difficult but the usage process of VPN in any device is very much simple.

 

Hope after reading this article you are successfully able to connect VPN to your router.

 

Leave a Reply

Your email address will not be published. Required fields are marked *